← Sensors
HVAC unit
The air in the room, the air it blows and the air outside, the humidity and the power it draws, with switches for its fan, cooling and heating that Mizelum sets, by hand or by an automation. The simulated one sits on an RS-232 hub.
Readings
5 sensorsTemperature21.6°C5133000C-42
Relative humidity48.2%5133000C-43
Power342.5W5133000C-89
Current1.49A5133000C-4A
SwitchON5133000C-0D
Example readings
Device
- Status
- Simulated
- Device type
- 0x000C
- Link
- 2.4 GHz radio (nRF24L01+)
- Report
- 19 of 25 bytes, with the supply voltage
A device type named in the protocol. The simulated hub has one, so the software can already show it; there is no hardware or firmware yet.
On the radio
What it sends
Every report carries the readings below, in this order, after the device's supply voltage.
Report
type 2 · 19 bytes of readings| Sensor | Tag | Sent as | Sensor id |
|---|---|---|---|
| Temperature | 0x42 | i16, 0.01 °C | 5133000C-42 |
| Relative humidity | 0x43 | u16, 0.01 % | 5133000C-43 |
| Power | 0x89 | i32, 0.1 W; negative when exporting | 5133000C-89 |
| Current | 0x4A | u16, 0.01 A | 5133000C-4A |
| Switch | 0x0D | u8, 0 off, 1 on | 5133000C-0D |